EPT Screen Printed Transfer


Printed with our signature plastisol ink and coated with our specially formulated adhesive powder, our Screen Printed Transfers give you an ultra soft feel without cracking, fading, or peeling for the life of the garment.

Customer Examples


  • Hanging shirt example
  • Car shirt example
  • Slay shirt example
  • Car shirt example

Don't forget To Gang Your Artwork


Every Transfer is a gang sheet because there's no fee to do it - EVER. So get those tags, logos, and whatever else you can on your sheets for pant/short legs, left chest logos sleeves, and more.

Don't forget To Gang Your Artwork


Every Transfer is a gang sheet because there's no fee to do it - EVER. So get those tags, logos, and whatever else you can on your sheets for pant/short legs, left chest logos sleeves, and more.

100+ Spot Colors Available


You’d be hard pressed not to find a spot color from our selection
that works for you, but if you don’t, we offer a Pantone color matching
service for $40 per spot color.

U.S. Pricing Guide


Orders require a $35 deposit & include 2 revisions.
Sheets are 15" x 20" with a print area of 13" x 19".

EPT Pricing Guide

Canadian Pricing Guide


Orders require a $35 deposit & include 2 revisions.
Sheets are 15" x 20" with a print area of 13" x 19".

EPT Pricing Guide

Services Pricing Guide


Recreate artwork fee
$30.00 / order
Spot Color Changes
$25.00 / order
PMS Color Matching
$40.00 / color
Cutting Services
$0.80 / sheet
Extra Revision Fee
$20.00 / revision

Rush Services Pricing Guide


Same Day 1-Color
FREE!
Same Day 2+ Colors
$100.00 / order
Proof Priority
$30.00 / order

The Softest, Toughest, and Most Vibrant


24 years in the business means that our speciality formulated plastisol ink and adhesive powder has stood the test of time, and it’s the best. Our Screen Printed Transfers have a guaranteed shelf life of 6 months.

Artwork Guidelines


The screen printing process requires crisp lines produced by vector based software. Send us your artwork in vector format and... no $30 recreate artwork fee! :)

Text

Convert all text to “outlines” in Adobe Illustrator and “curves” in Corel Draw.

Lines & Details

1pt minimum for lines so that they show up clear and properly.

Knockouts

2pt minimum for knockouts so they don’t fill in and you can feel that soft garment underneath.

Gradients

Convert gradients to halftones. Make sure they aren’t too small to keep them from filling in.

Text

Convert all text to “outlines” in Adobe Illustrator and “curves” in Corel Draw.

Lines & Details

1pt minimum for lines so that they show up clear and properly.

Knockouts

2pt minimum for knockouts so they don’t fill in and you can feel that soft garment underneath.

Gradients

Convert gradients to halftones. Make sure they aren’t too small to keep them from filling in.

Application Instructions

Always use a commercial heat press.


1 / Pre-Press
Platen

3 cycles at 320° / 15 sec

2 / Adjust Press Settings

Set according to garment type

See list below for recommended
settings based on garment type

3 / Load Garment

Open bottom of garment & slide on platen.

4 / Pre-Press Garment

This will remove moisture
and wrinkles for an even press.

5 / Position Transfer

Ensure transfer is not on
wrinkles, seams, or creases.

6 / Press Transfer

Press at settings determined by garment type.

7 / Peel Transfer

Life the lid on the press
& peel transfer while hot.

8 / Make Some Money

Garment is ready for sale.

Heat Press Settings


For Most Standard Garments:

  • • 100% Cotton, 100% Polyester
  • • Cotton/Poly Blends
  • • Cotton/Spandex (All Blends)
  • • Spandex/Poly (All Blends)
  • • Most Nylons: TEST

Set Heat Press To:

  • Temperature: 320°F / 160°C
  • Pressure: Medium (6-8) / 40-50 PSI
  • Time: 10-12 sec

For Low Melting Point Materials:

  • • Non-woven Polypropylene

Set Heat Press To:

  • Temperature: 275°F / 135°C
  • Pressure: Medium (6-8) / 40-50 PSI
  • Time: 10-12 sec