Built For Game Day.
Use our Gang Sheet Builder to layout your DTF team names, numbers and Combo Names & Numbers. Lay it out. Send it. We print them same day.
Tough Prints For Every Team.
DTF Names & Numbers have the durability when athletes play hard. They stand up to competition and are victorious. Always looking great game after game, wash after wash.
Highlights of Jersey DTF
The Best Value In DTF. Up To 70% Off.
No minimums. No Surprises.
100% Cotton
Cotton/Poly Blends
100% Polyester
100% Polyester Mesh
Why Jersey DTF?
Transfers That Can Take The Heat.
Comfortable. Breathable. Built to last. DTF Names & Numbers do not crack, fade or peal. They last the lifetime of the garment. Stretch with the natural curvature of the human body
Best For:
- Everyday cotton, poly blend garments and low melt materials (non-woven polypropylene).
- Low volume production.
- No Minimums. Unlimited Colours.
- Up To 70% Off.
- Easy to use gang sheet builder.
- Same day turnaround when submitted by 1 pm est.
Application
Press Like A Pro.
Always use a commercial heat press.
1. Pre-Press Platen
3 cycles at 320˚F/160˚C
Medium/Heavy pressure (6-8)/60-80 PSI
For 15 seconds.
2. Adjust Press Settings
Set heat, pressure, and time according to settings dictated by material.
3. Load Garment
Open bottom of garment & slide
onto platen, making sure seams
are off the pressing area.
4. Pre-Press Garment
This removes moisture & wrinkles for a flat/dry pressing area
5. Position Transfer
Ensure transfer is not sitting on wrinkles, seams, or creases.
6. Press Transfer
According to material settings.
7. Peel Transfer
Peel with a smooth/steady motion.
Garment is Ready!
Washing Instructions
Machine wash warm.
Turn garment inside out
Do not bleach
Tumble dry ‑ medium heat
Do not iron
Heat Press Settings For DTF Jerseys
For Non-Heat Sensitive Fabrics
(100% Cotton and Cotton/Poly Blends)
- Press Temp: 320°F
- Pressure: Medium/Heavy 6-8 (60psi)
- Time: 10-12 Seconds
- Peel Hot
For Heat Sensitive Fabrics
(100% Polyester, Tri-Blends, Spandex
Mesh, Nylon and Neoprene)
- Press Temp: 285°F
- Pressure: Medium/Heavy 6-8 (60psi)
- Time: 10-12 Seconds
- Peel Hot
For Low-Melt Materials
(Non-woven Polypropylene, PET)
- Press Temp: 270°F
- Pressure: Low/Medium 4-5 (40-50psi)
- Time: 10-12 Seconds
- Peel Cold