Press Like A Pro!
Detailed pressing instructions for EPT, FCF and DTF.
Application
Press Like A Pro.
Always use a commercial heat press.
1. Pre-Press Platen
3 cycles at 320˚F/160˚C
Medium/Heavy pressure (6-8)/60-80 PSI
For 15 seconds.
2. Adjust Press Settings
Set heat, pressure, and time according to settings dictated by material.
3. Load Garment
Open bottom of garment & slide
onto platen, making sure seams
are off the pressing area.
4. Pre-Press Garment
This removes moisture & wrinkles for a flat/dry pressing area
5. Position Transfer
Ensure transfer is not sitting on wrinkles, seams, or creases.
6. Press Transfer
According to material settings.
7. Peel Transfer
Peel with a smooth/steady motion.
Garment is Ready!
Washing Instructions
Machine wash warm.
Turn garment inside out
Do not bleach
Tumble dry – medium heat
Do not iron
Heat Press Settings For EPT
For Non-Heat Sensitive Fabrics
(100% Cotton and Cotton/Poly Blends)
- Press Temp: 320 – 350°F
- Pressure: Medium/Heavy 6-8 (60psi)
- Time:
- 10-12 Seconds (320°F) OR
- 4-6 Seconds (350°F)
- Peel Hot
For Heat Sensitive Fabrics
(100% Polyester, Tri-Blends, Spandex
Mesh, Nylon, and Neoprene)
- Press Temp: 285°F
- Pressure: Medium/Heavy 6-8 (60psi)
- Time: 10-12 Seconds
- Peel Hot
For Low-Melt Materials
(Non-woven Polypropylene, PET)
- Press Temp: 270°F
- Pressure: Low/Medium 4-5 (40-50psi)
- Time: 10-12 Seconds
- Peel Warm/Cold
Heat Press Settings For FCF
For Non-Heat Sensitive Fabrics
(100% Cotton and Cotton/Poly Blends)
- Press Temp: 305°F
- Pressure: Medium/Heavy 6-8 (60psi)
- Time: 10-12 Seconds
- Peel Warm/Cold
For Heat Sensitive Fabrics
(100% Polyester, Tri-Blends, Spandex
Mesh, Nylon, and Neoprene)
- Press Temp: 285°F
- Pressure: Medium/Heavy 6-8 (60psi)
- Time: 10-12 Seconds
- Peel Warm/Cold
For Low-Melt Materials
(Non-woven Polypropylene, PET)
- Press Temp: 270°F
- Pressure: Low/Medium 4-5 (40-50psi)
- Time: 10-12 Seconds
- Peel Cold
Heat Press Settings For DTF
For Non-Heat Sensitive Fabrics
(100% Cotton and Cotton/Poly Blends)
- Press Temp: 320°F
- Pressure: Medium/Heavy 6-8 (60psi)
- Time: 10-12 Seconds
- Peel Hot
For Heat Sensitive Fabrics
(100% Polyester, Tri-Blends, Spandex
Mesh, Nylon and Neoprene)
- Press Temp: 285°F
- Pressure: Medium/Heavy 6-8 (60psi)
- Time: 10-12 Seconds
- Peel Hot
For Low-Melt Materials
(Non-woven Polypropylene, PET)
- Press Temp: 270°F
- Pressure: Low/Medium 4-5 (40-50psi)
- Time: 10-12 Seconds
- Peel Cold
Heat Press Settings For DTF Jerseys
For Non-Heat Sensitive Fabrics
(100% Cotton and Cotton/Poly Blends)
- Press Temp: 320°F
- Pressure: Medium/Heavy 6-8 (60psi)
- Time: 10-12 Seconds
- Peel Hot
For Heat Sensitive Fabrics
(100% Polyester, Tri-Blends, Spandex
Mesh, Nylon and Neoprene)
- Press Temp: 285°F
- Pressure: Medium/Heavy 6-8 (60psi)
- Time: 10-12 Seconds
- Peel Hot
For Low-Melt Materials
(Non-woven Polypropylene, PET)
- Press Temp: 270°F
- Pressure: Low/Medium 4-5 (40-50psi)
- Time: 10-12 Seconds
- Peel Cold